Product Description
4' 1200mm Length 18W 20W 22W Led Tube T8 Milky Cover Internal Driver Tube Lamps For Mall Supermarket
Quick Detail:
- LED Tube Light 4 feet
- Input: AC 85V-265V, 50/60Hz
- Luminous Flux: 2520lm±10%
- CRI: >80
- PF: >0.95
- Lifespan: ≧50000Hrs
Please see the attached specification :
MF T8 18W led tube SPEC 120LM - 2018.pdf
Description: High brightness / led fluorescent replacement
|
Model No. :
|
Luminous Flux (lm) : |
| MF-T8120 |
2520±10% |
| Input voltage : |
CRI(Ra) : |
| AC 85-265Vac 50hz/60hz |
>=80 |
| Power(watt) : |
Lifespan : |
| 18W |
≥50000hrs |
| Product size(mm) : |
Beam Angle : |
| ¢26mm*1200mm |
120° |
| Color temperature : |
Material : |
| Warm White(2700-3000K), Pure White(3500-4500K), Cold White(5000-6000K) |
Aluminum + PC |
| LED Chip : |
Operating Temperature : |
| Epistar |
-20°C ~40°C |
| IP : |
Certificate : |
| 20 |
CE/RoHS |
| Warranty Period : |
|
| 3 years |
|
Competitive Advantage:
1. Good Heat dissipation design :
Adopting high thermal conductivity aluminum shell and wonderful heat conducting aluminum PCB board to improve the heat effectively, to realize low temperature, Decrease Lumens depreciation and keep long life span about 50,000 hrs.
2. LED Chips:
With super bright SMD leds, High efficiency, energy saving, environmental protection, under the same condition, led tubes could save 70% energy and electric cost than the traditional tubes.
98% visible light, CRI >=80 make the color of lighted objects much closer to natural color. And the traditional tube has only 30% visible light.
3. Driver Design: Internal driver
Stable driver, constant-current, PFC circuit, EMC circuit design, the driver with CE, RoHS certification.
4. Others:
Adopt aluminum frame, no tube deformation resulted from long time hanging, more safety. With special PC cover and aluminum shell material convenient to transport, difficult break up and anti-vibration.
Installation Instructions:
1) Turn off the electric power firstly, and then take down the tradition fluorescent tube
2) No starter or ballast needed, cut off or directly take off the ballast and starter from the tradition fluorescent tube fixture.
3) Connect the wires: According bellow wiring diagrams to connect the led tube.
4). Make sure everything is correctly, and than turn on the power, the led tube will light.
Packing:
Applications:
Emporium, superstore, school, factory, underground parking, passageway, hospictal, official large building and so on public place lighting.
Service :
If you are interested in it, feel free to contact with me , I will quote you best price.
Your message must be between 20-3,000 characters!